Skip to main content

Hinged Enclosure (IP66 rated)

 Visit the online store page

Current manufacturer information: Integra H------HLL (dashes replaced with dimensions, see spec sheets below)

IP66 rated polycarbonate enclosure, hinged and lockable lid. Can be used to house eGauge meter(s) and accessories. Available in 14"x12"x6", 12"x10"x4", and 10"x8"x4" sizes.

Each enclosure comes with an eGauge Mounting Kit, and DIN rail(s) (DIN rail(s) pre-installed). The 12"x10"x4" enclosure has a single DIN rail installed, while the larger have two.

Hinged Enclsosure


Full specifications can be found in the Documents section

  • IP66
  • UL-50 / c-UL Listd

Hardware included

  • 1x Hinged, lockable lid enclosure with DIN rail pre-installed
    • 2x DIN rails on 10"x8"x4", 14"x12"x6", 16"x14"x7 and 12"x10"x6"
    • 1x DIN rail on 12"x10"x4" and 10"x8"x4"

Assembly/installation information

  1. Attach the DIN clip to the underside of eGauge using 4x silver screws
  2. Optionally attach the L-Bracket to the DIN clip for alternative mounting options
  3. Connect the eGauge and other equipment to the pre-installed DIN rail