Initial Configuration
Configuration steps that must be performed after installation!
Installation Overview Tips (START HERE)
Process and Tips for a successful installation Download and read the EG4xxx Owner's Manual here...
Initial Configuration Steps
The eGauge must be configured for the system monitored or data will be invalid. To configure the...
eGauge Configuration Guide
The eGauge is a powerful, highly accurate piece of monitoring hardware. However, it is essential ...
Accessing eGauge Interface
If the credentials need to be reset or remote configuration enabled, visit this KB article. Ther...
Register a device, remote access, and password resets
To only access a device interface, visit this KB article. To register a device and get access, l...
Configuring CTid-enabled sensors
What is CTid? CTid is a technology created by eGauge which allows the eGauge meter to obtain inf...
Commissioning readings with the Channel Checker
After configuring the eGauge, it is necessary to commission the readings to ensure accuracy using...
NTP (Network Time Protocol) and Date and Time Configuration
Overview All eGauge meters use NTP (Network Time Protocol) to obtain the current date and time. ...