Advanced Configuration
Advanced meter configuration (above and beyond monitoring real power).
Voltage registers
Voltage registers are configured in much the same way as power registers (the default register ty...
Amperage Registers
The eGauge can be set to record individual CT amperages as separate registers. Unlike power regis...
Power Register Subtypes
By default, the eGauge will record Power registers as the "Net" (=) subtype. This means the regis...
Power Factor
Although the eGauge uses power factor to calculate real power, the power factor values are not st...
THD Registers
THD is a measurement of the harmonic distortion of a signal given it's fundamental frequency, and...
Configuring Unsupported CTs
Custom CT size scale factor Calculation Always use caution when choosing to use unsupported CTs w...
Connection Quality
The eGauge can record network connection quality as a percentage value (0..100). This information...
Net import/export registers on line side tap system
On a backfed PV installation (that is, an installation where excess solar production is fed back ...
Net import/export registers on a backfed system
In some cases, it can be useful to graph the net flow of power to and from the utility, instead o...
Reactive Power (kVAr)
Reactive power can be recorded using a formula register. First, create a power register for the ...
Potential Transformer Configuration
eGauge Systems cannot guarantee meter accuracy when third party potential transformers are used. ...
Frequency Registers
The eGauge can be set to record individual CT or line voltage frequency readings as separate regi...