Recently Updated Pages

Network Connections

The eGauge meter can be connected to a users TCP/IP network using Ethernet, HomePlug, or WiFi com...

Configuring a remote eGauge

Best practice is to set up all the registers on all devices before attempting to pull registers f...

Configuring a USB WiFi dongle

The EG4xxx, with an attached supported USB WiFi dongle, can be configured to connect to a WiFi ne...

Chart

Overview The Chart element is designed to provide a modernized and customizable graph-based disp...

5 Pin Power Plug

 Visit the online store page Current manufacturer information: Adam Tech EBH-05-G Voltage termi...

2-pin CT Plug

 Visit the online store page Original manufacturer part number: Tyco model 284506-2 Do not conn...

eGauge Support Library

Welcome to the eGauge Support Library! Here, you will find all sorts of information related to th...

Monitoring multiple services with one eGauge meter

Overview It's common to find sites with large stepdown transformers (e.g. to convert a 277/480V ...

Monitoring 347/600V Services

Overview The 347/600Vac wye service (347V phase to neutral, 600V phase to phase) is rarely seen ...

I've erased all of my data, how can I get it back?

Overview From firmware version 3.6.3 onward, the eGauge meter will ask the user whether they wan...

Can I connect to the eGauge without a network?

You may also refer to the complete guide, Directly Connecting to the eGauge Below are the recomm...

Extending the length of the CT leads

CTs may also be extended without splices or soldering using the eGauge Sensorhub as a CT extensio...

Twisted Pair Wire

 Visit the online store page SKU: TPFOOT 18ga black and white twisted pair wire for extending C...

Power Whip (208V or 277V)

 Visit the online store page SKU: Power Whip The Power Whip is an installation component used t...

Remote device via eGauge USB485 adapter

The EG4xxx has two USB ports which may be utilized for communicating with third-party serial devi...

XML API

eGauge Systems offers access to a free, unrestricted API for use in developing applications which...

What is a Register?

The eGauge meter stores data points in registers. Each register contains a cumulative value for a...

How do I factory reset the eGauge?

In certain situations, it may be necessary or desirable to perform a factory reset on an eGauge m...

Working With Max Demand Export Data

Overview As of firmware version 3.1.10, the eGauge supports rolling max demand exports through t...

Custom Modbus definitions (read from any Modbus device)

In firmware v4.0 and greater, a graphical interface to edit Modbus maps is available. This is rec...