Skip to main content

Recently Updated Pages

Extending the length of the CT leads

eGauge Installation

CTs may also be extended without splices or soldering using the eGauge Sensorhub as a CT extensio...

Updated 1 year ago by aaron

Twisted Pair Wire

eGauge Hardware Product Pages Connectors and cables

 Visit the online store page SKU: TPFOOT 18ga black and white twisted pair wire for extending C...

Updated 1 year ago by aaron

Power Whip (208V or 277V)

eGauge Hardware Product Pages Connectors and cables

 Visit the online store page SKU: Power Whip The Power Whip is an installation component used t...

Updated 1 year ago by aaron

Remote device via eGauge USB485 adapter

eGauge Meter Communication Serial and USB485

The EG4xxx has two USB ports which may be utilized for communicating with third-party serial devi...

Updated 1 year ago by Andrew

XML API

eGauge Meter Communication XML API

eGauge Systems offers access to a free, unrestricted API for use in developing applications which...

Updated 1 year ago by Andrew

What is a Register?

General

The eGauge meter stores data points in registers. Each register contains a cumulative value for a...

Updated 1 year ago by Andrew

How do I factory reset the eGauge?

General

In certain situations, it may be necessary or desirable to perform a factory reset on an eGauge m...

Updated 1 year ago by Andrew

Working With Max Demand Export Data

Advanced eGauge Operation

Overview As of firmware version 3.1.10, the eGauge supports rolling max demand exports through t...

Updated 1 year ago by Andrew

Custom Modbus definitions (read from any Modbus device)

eGauge Meter Communication Modbus

In firmware v4.0 and greater, a graphical interface to edit Modbus maps is available. This is rec...

Updated 1 year ago by aaron

Accessing eGauge Interface

eGauge Meter Configuration Initial Configuration

If the credentials need to be reset or remote configuration enabled, visit this KB article. Ther...

Updated 1 year ago by Andrew

Where do I find the MAC address for my device?

General

Every eGauge meter has at least one MAC address. The MAC address can be used to identify the mete...

Updated 1 year ago by Andrew

What can I do if I've lost my device password?

General

First, make sure you are accessing the eGauge correctly. By default, the factory credentials on t...

Updated 1 year ago by Andrew

What password do I use to save a change to the settings?

Configuration

For meters purchased on or after Jan 2021: Meters shipped after January 2021 will come with a ra...

Updated 1 year ago by Andrew

CT selection guide

CT FAQs and other information

In this article... Introduction Interpreting CT models and SKUs Determining how many CTs to u...

Updated 1 year ago by aaron

Automated USB Export and Upgrade scripting file

Advanced eGauge Operation USB thumb-drive functionality

Introduction Starting with firmware v3.4, eGauge firmware supports USB Mass-Storage devices on h...

Updated 1 year ago by aaron

Where can I find a HomePlug 1.0 adapter for my eGauge2?

eGauge Meter Documentation Legacy Meters (EG3xxx, eGauge2)

The eGauge2 requires a HomePlug (PLC) adapter that uses the HomePlug 1.0 standard. Adapters that ...

Updated 1 year ago by Andrew

Dashboard

eGauge Meter UI Mobile and NG interface

Overview Available in firmware v4.1 and newer, the eGauge interface has a new mobile-friendly da...

Updated 1 year ago by Andrew

Rope CT Positioning Guide

CT FAQs and other information

Rope CTs should be installed properly to reduce the maximum error based on positioning. Ideally t...

Updated 1 year ago by aaron

WiFi Access Point (TL-WA801ND)

eGauge Hardware Product Pages Communication Hardware

 Visit the online store page Current manufacturer information: TP-Link TL-WA801ND The TP-Link W...

Updated 2 years ago by aaron

WiFi adapter (USB powered TL-WR802n)

eGauge Hardware Product Pages Communication Hardware

 Visit the online store page Current manufacturer information: TP-Link model TL-WR802n The USB-...

Updated 2 years ago by aaron