Search Results

 Visit the online store page Current manufacturer information: Chiyu model BF-430 EG4xxx (Pro and Core) are recommended to utilize the eGauge USB485 (serial to USB) adapter instead if possible. Power can be provided (9-30V) to either terminals or barrel jac...

 Visit the online store page Model: USB485 The eGauge USB485 is used to receive and send serial data between a RS485 serial chain and a host's USB port. Primarily it is used for compatible eGauge meters (EG4xxx Core and Pro) to record data from remote Modbus...

All eGauge models with firmware v3.2 or higher have Modbus TCP output capability. eGauge models with USB ports also have capability for Modbus RTU (serial via RS485) output capability, with use of the eGauge USB485 converter. The Modbus server can be enabled i...

The EG4xxx has two USB ports which may be utilized for communicating with third-party serial devices via the eGauge RS485-USB converter (USB485). This effectively replaces the BF-430 used with older model eGauges. In addition, a network connection is not requi...

The eGauge USB485 converter may be used as a standard serial-to-USB converter on a computer to read data from an eGauge or communicate with other third party devices besides the eGauge. The eGauge USB485 uses the FT230X chipset from FTDI. Up to date systems sh...

The MultiTech cell modem is used with some eGauge installations to provide cellular Internet access in locations where wired Internet is not a viable option. The troubleshooting guide covers aspects of the modem configuration as they pertain to usage with an e...

NOTICE: The TP-Link TL-WA701ND has been discontinued and replaced with the TP-Link TL-WA801ND. If using the TL-WA801ND, please refer to this article. eGauge offers limited support for the TP-Link TL-WA701ND when configured for use as a WiFi bridge. This allow...

This product is not fully supported by eGauge Systems. Information here is provided as-is. The TSense Environmental Sensor from ACI can be used to read CO2 concentrations, relative humidity, and temperature. The TSense uses an RS485 interface, and as such req...

Overview This product is not fully supported by eGauge Systems. Information here is provided as-is. The T4411 Temperature Sensor from Comet can be used to read temperature in outdoor installations or where a sensor meeting IP65 requirements must be used. The...

 Visit the online store page Model: EDC eGauge Display Caster The eGauge Display Caster provides an easy method display an eGauge meter device interface on a TV or monitor via HDMI through an easy-to-use interface. The Display Caster has ...

 Visit the online store page Current manufacturer information: Integra H------HLL (dashes replaced with dimensions, see spec sheets below) IP66 rated polycarbonate enclosure, hinged and lockable lid. Can be used to house eGauge meter(s) and accessories. Avai...

 Visit the online store page SKU: EGMK The DIN Rail Mounting Kit is used to attach the eGauge Core or Pro to a piece of DIN rail or another surface. The kit comes with one DIN clip that is screwed directly into the meter, one L-bracket for using the DIN clip...

 Visit the online store page Current manufacturer information: Functional Devices model TR50VA008 Stepdown transformers are intended only to power 120V equipment off higher voltage service. To measure 480V delta systems (no neutral), 600V delta systems (no n...

 Visit the online store page SKU: PEK-120/PEK-120-XL The Powered Enclosure Kit is designed for installation of the eGauge in combination with one of several communication protocol devices. Components included Enclosure The kit comes wi...

The powered enclosure kit (PEK) provides a collection of tested, supported hardware to make installing and mounting eGauge hardware. Additional provisions exist for some third party communications hardware as well. The PEK arrives disassembled, and the video b...

 Visit the online store page SKU: PEK-277/PEK-277-XL The Powered Enclosure Kit is designed for installation of the eGauge Meter on a 277/480V service where 120V is needed for third party hardware. The kit comes with components that complement the eGauge mai...

 Visit the online store page 18ga black and white twisted pair wire for extending CT leads or other signal wiring. Twisted pair wire is 18 AWG rated at 600V. Wire is sold without connectors or other hardware. If extending CT leads, make splices using the CT ...

CTs may also be extended without splices or soldering using the eGauge Sensorhub as a CT extension kit. Do not use wire nuts to connect CT extensions. Wire nuts will degrade and interfere with the low-voltage CT signals. Split core CTs can be extended with t...

 Visit the online store page SKU: Power Whip The Power Whip is an installation component used to connect the eGauge meter to a breaker panel. Each Power Whip includes a 5-pin Power Plug and four 8’ lengths of THHN #12 stranded copper wire for Neutral, L1, L...