Search Results

Please make sure to read the eGuard Overview before continuing. See other related documents in the eGuard Fundamentals chapter. The eGuard Permissions page can be found in eGuard at the top tab bar. Permissions allow you to grant and manage user privileges...

Please make sure to read the eGuard Overview before continuing. See other related documents in the eGuard Fundamentals chapter. eGuard has a hierarchical group structure. Devices exist in a top-level group or sub-group of a top-level group. Sub-groups are ...

Please make sure to read the eGuard Overview before continuing. See other related documents in the eGuard Fundamentals chapter. eGuard offers limited alert functionality. eGuard processes alerts once a day (around midnight). If there are devices that chang...

Please make sure to read the eGuard Overview before continuing. See other related documents in the eGuard Fundamentals chapter. Sites allow for a grouping of devices based on location, and has fields to add information relevant to thatparticular location, ...

See attached document for information LEED v4 credits that are applicable to the eGauge and metering.

All EG30xx and EG4xxx meters are calibrated during production. Once this initial calibration has been performed, the meter requires no ongoing inspections, maintenance, or calibration. Although all meters are calibrated to the same standard during the product...

Firmware version 4.6 and newer can have alerts configured through the Modern Interface. Overview The eGauge can be configured to send alerts based on a variety of trigger conditions. Alerts must be configured through the eGauge interface, and the eGauge need...

Check out the User Interface Tour for an introduction to using the Chart! The eGauge App provides ease of access to the Modern user interface. For information on using the eGauge App, please visit this article. The Modern UI requires a login, installers sh...

Overview The Chart element is designed to provide a modernized and customizable graph-based display to allow for easy visual evaluation of readings captured by the eGauge meter. The Chart element is optimized for mobile browsers and small screens, with a mini...

 Visit the online store page Inhand Networks IR615 is a cellular to Ethernet modem that can provide the eGauge unit and related supported equipment with internet access on a 4G LTE T-Mobile network. A compatible T-Mobile dataplan can be purchased through eGa...

Overview eGauge Systems offers a mobile app for accessing and viewing meter data. The app is free and available on Android and iOS.  Play Store App Store This article is intended to provide a basic overview of the app functionality. For additional informat...

Rope CTs should be installed properly to reduce the maximum error based on positioning. Ideally the conductor being monitored will be perpendicular to the rope CT loop, and pass through the center of the rope CT as shown below in position 1. Tie-wraps or other...

Overview Current firmware allows the eGauge meter to record data from remote devices using Modbus RTU (using the USB485 USB-to-serial converter) and Modbus TCP (Ethernet). If the remote device supports SunSpec over Modbus, there is not a need to create a Mod...

 Visit the online store page This article is for the ERA-XXX-YYYY CTid enabled Rope CT. For the non-CTid enabled ropes (RCT-XXX-YYYY) please visit this article. In the upcoming future all Rope CTs will be CTid-enabled. Check the model number on the tag of the...

Overview The eGauge can record data from a variety of remote devices. This includes other eGauge meters (via UDP over a local network or via TCP through the proxy server) and third party devices via Modbus TCP or Modbus RTU (using a USB to RS485 converter). T...

In certain situations, it may be necessary or desirable to perform a factory reset on an eGauge meter (for example, when moving a meter to a new site, or if the meter is set with an unknown static IP address). The process to perform a factory reset varies base...

Overview As of firmware version 3.1.10, the eGauge supports rolling max demand exports through the CSV export function built into the main graph page. These exports contain a rolling average over the past X minutes with a data point presented at the interval ...

EG41xx meters with built-in HomePlug communication have been discontinued. If HomePlug communication is required on an EG40xx, one HomePlug adapter may be connected to the eGauge meter's Ethernet port and the other may be connected to the router or modem as in...

The eGauge meter stores data points in registers. Each register contains a cumulative value for a given data point. Any value stored by the eGauge is assigned a register, regardless of the source (raw reading from a sensor/voltage input, calculated values such...

 Visit the online store page Model: EV1000 Requires the eGauge Sensor Hub and eGauge model EG4xxx (Pro or Core), not compatible with older model units. Only use straight-through RJ-11 cables to connect powered sensors to the Sensor Hub. Telephone systems ge...