References
Listed below is all the known content in the system that links to this item.
Unexpected readings in Channel Checker
This article covers common physical reasons for unexpected sensor readings in the channel checker...
Logging data from pulse meters
This article describes using pulse sensors to read from energy meters, but any meter such as flow...
AC Split-Core CTs with CTid
Visit the online store page (1% Accuracy) Visit the online store page (0.5% Accuracy) These...
Ambient Temp Sensor (ETLW)
Visit the online store page Model: ETLW Requires the eGauge Sensor Hub and eGauge model EG4xxx...
Temperature Probe Sensor (ETN100)
Visit the online store page Model: ETN100 Requires the eGauge Sensor Hub and eGauge model EG4x...
4-20mA Sensor (EC420)
Visit the online store page Model: EC420 Requires the eGauge Sensor Hub and eGauge model EG4xx...
eGauge High Voltage Sensor (EV1000)
Visit the online store page Model: EV1000 Requires the eGauge Sensor Hub and eGauge model EG4x...
Low Voltage / Dry Contact Sensor (ELV2)
Visit the online store page Model: ELV2 Requires the eGauge Sensor Hub and eGauge model EG4xxx...
Pulse Sensor (EPS)
Visit the online store page Model: EPS Requires the eGauge Sensor Hub and eGauge model EG4xxx ...
Identifying Rope CTs
The eGauge supports Rope CTs from three different manufacturers. In order to determine which CT t...
Monitoring 480V and 600V delta systems
Never attempt to connect the eGauge directly to a 480V delta or 600V delta service using the "L...
Submetering
The EG4xxx series meters are capable of monitoring up to 7 single-phase units (EG4015) or 15 sing...
Monitoring High Voltage DC Loads
Overview The EG4xxx meter features a low voltage terminal (Ldc) which can be used to measure 9-6...
CTid-enabled AC Rope CT (ERA-XXX-YYYY)
Visit the online store page This article is for the ERA-XXX-YYYY CTid enabled Rope CT. For the ...
CT selection guide
To browse all available and supported CTs, visit the online store. For a detailed list of all CT ...