Other Hardware Documentation
Documentation related to other eGauge and third party hardware
WiFi, Cellular, and other Networking
TP-Link Access Point Setup (TL-WA801ND)
The TP-Link TL-WA801ND is a multi-function access point. This document is intended to assist with...
Multitech Cell Modem Setup (MTE-LAT6-B07)
Starting May 2022, cellular plans using the fast.t-mobile.com APN must have a new SIM card and ...
TP-Link powered USB WiFi Bridge Setup (TL-WR802n)
The TP-Link TL-WR802N is a WiFi bridge that can be used to connect the eGauge to a wireless netwo...
Third party Environmental Sensors
Information on third party environmental sensors
Comet T4411 Temperature Sensor (Modbus RTU)
Overview This product is not fully supported by eGauge Systems. Information here is provided as-...
ACI TSense Environmental Sensor
This product is not fully supported by eGauge Systems. Information here is provided as-is. The T...
IMT Weather Station (Si-RS485TC-2T-v-MB)
Powered enclosure kit (PEK) assembly tutorial
The powered enclosure kit (PEK) provides a collection of tested, supported hardware to make insta...
Legacy Hardware Documentation
For hardware which is no longer available, but may still be in use at existing sites.
(Legacy) Multitech Cell Modem Troubleshooting
The MultiTech cell modem is used with some eGauge installations to provide cellular Internet acce...
(Legacy): Maestro E206XT cell router configuration
The Maestro E206XT is a powerful and highly configurable cellular modem and router. This article...
(Legacy) TP-Link access point setup (TL-WA701ND)
NOTICE: The TP-Link TL-WA701ND has been discontinued and replaced with the TP-Link TL-WA801ND. If...
Power Relay Module (PRM3) Software Documentation
Software documentation for the Power Relay Module PRM3
Mask control
Back to Main Power Relay Module (PRM3) Product Page. The eGauge PRM3 has 3 independently control...
Dashboard control of PRM3
eGauge meter Dashboard Control Back to Main Power Relay Module (PRM3) Product Page. A "Switch" ...
Modbus Control of PRM3
Back to Main Power Relay Module (PRM3) Product Page. The Power Relay Module acts as a Modbus ser...
Lua Scripting with PRM3
Back to Main Power Relay Module (PRM3) Product Page. The eGauge meter provides a Lua scripting e...
SCPI Control of PRM3
Back to Main Power Relay Module (PRM3) Product Page. SCPI introduction SCPI (pronounced "skippy")...
JSON WebAPI relay control
Back to Main Power Relay Module (PRM3) Product Page. WebAPI documentation may be found at https:...
eGauge Display Caster Manual
This manual is for the most current display caster software. Older version display casters may h...