Advanced eGauge Operation
Covers advanced operations, such as working with Alerts and other advanced software features
USB thumb-drive functionality
eGauge Core/Pro have USB and thumb-drive storage functionality
Automated USB Export and Upgrade scripting file
Introduction Starting with firmware v3.4, eGauge firmware supports USB Mass-Storage devices on h...
USB Data Exports through LCD
Data can be exported directly from eGauge 4xxx meters using a USB mass storage device. These expo...
Formatting a USB stick on Windows 10
These instructions may not work for all versions of Windows and are provided as-is. eGauge Suppor...
Alerts
All about eGauge Alert functionality
Configuring eGauge Alerts (Modern Interface method)
Firmware version 4.6 or newer is needed to set up eGauge device alerts in the Modern Interfa...
Alerts and Email Gateway with SendGrid
Introduction If delivering email to only one recipient, consider using the eGuard Alert Service ...
Configuring eGauge Alerts (Classic Interface method)
Firmware version 4.6 and newer can have alerts configured through the Modern Interface. Overview...
Example and description of JSON alert POST data
{ "now": "1568419537.35", "alerts": [ { "id": 1804290019, "priority": 7, ...
Zero out data/spikes tutorial
Devices on firmware older than version 3.01 may experience a phenomenon where register configurat...
eGauge language options and adding new languages
The EG30xx and EG4xxx have support for different locales. The eGauge will use the language associ...
High Gain Mode
High-gain mode is available on the EG4xxx hardware only. To enable high-gain mode, navigate to Se...
Connecting via the eGauge proxy server using IE 10/11
Users with Internet Explorer 10 and 11 may require some additional steps to function properly wit...
Monitoring High Voltage Systems
Warning: Systems greater than 600V phase-to-phase are not fully supported by eGauge Systems. Supp...
Formula registers and remote devices
Physical registers represent any single data point recorded by an eGauge meter. These can come fr...
Register ID and location
The eGauge uses "registers" to record data. Each register is an independent data point. For examp...
Working With Max Demand Export Data
Overview As of firmware version 3.1.10, the eGauge supports rolling max demand exports through t...
Monetary registers
Overview By default, the eGauge applies a flat rate cost per kWh used or generated to the summar...
Lua Scripting
Chart Functions
Editing chart functions is an advanced feature which requires knowledge of JavaScript. eGauge sup...