Skip to main content

Appliances

This example illustrates how to configure 120Vac (single pole) and 240Vac (two pole) appliances.

appliances.png

Registers:

appliance-reg.png

Notes:
  • Registers defined for appliances do not appear in the totaling rules. Just defining the registers will make them appear in the appropriate places (e.g., in the legend of the dashboard graph).
  • A single CT is sufficient both for 120Vac and pure 240Vac appliances. 240Vac appliances with asymmetric currents on the two legs (i.e., with a non-zero current on Neutral) require separate CTs per leg/phase.
Back to top