Visit the online store page
Model: TPC-DC

Warning
- The EG4xxx DC Power Supply is suitable for testing and programming an eGauge, and cannot be used when measuring power unless when used in conjunction with EV1000 high voltage sensors.
- The EG4xxx DC Power Supply is rated for 120-240Vac. It cannot be connected to higher input voltages.
- The EG4xxx DC Power Supply must be connected to the Ldc terminal. If connected to a Sensor/CT input damage may occur
Overview
The EG4xxx DC Power Supply may be used for:
- Powering the meter when monitoring a 480V delta or other high-voltage system that utilizes the EV1000 voltage sensors for voltage measurements.
- Easily powering the meter from a standard wall outlet, for the use of programming the meter before installation or downloading data after removed from an installation.
- Powering the meter if the installation type does not require reference voltage for AC or DC power calculations.
Specifications
- 100Vac to 240Vac input
- 12Vdc output @ 0.42A
- UL Listed
Included Hardware
- AC to DC power supply
- 2 pin plug (attached)
- 4x Receptacle adapters
Installation & Assembly
- Select the appropriate receptacle adapter.
- Clip the receptacle adapter into the body of the power supply.
- Connect the two pin plug to the Ldc terminal (next to the five pin power plug).