Overview

The Export function is used to export register data in .csv file format. This function is available in Firmware v.4.6 and later and is available as a standalone menu item and as a Dashlet.

Prerequisites

• Firmware v.4.6 and later

Instructions

Step 1: Click on the hamburger menu in the upper left, then select Export.

Step 2: Now select the Metric to export and choose from the following options:

• average (e.g., kW for energy) - export average values.
• accrued value (e.g., kWh for energy) - export cumulative values relative to the start of the chosen date range.  Note that not all readings will make sense as accrued values such as temperature, or irradiance.  
• value accrued since epoch (e.g., kWh for energy) - export cumulative values relative to the start of recording for the meter.

Step 3: Next you'll select the Date Range. The date range determines the time frame for your data export. You can select a pre-set range or choose 'custom range' to set start and end dates using the calendar. Pre-set ranges tied to billing cycles use the date set in the Classic interface's Preferences page.

Step 4: Select an option from the Include drop down.

• final values only - This option will return simply the total accrued value for the entire date range chosen.
• subtotals - Any of these options will return subtotals or averages at the granularity specified. Available intervals are:
  • hourly subtotals/averages
  • daily subtotals/averages
  • weekly subtotals/averages

Step 5: Select any export options you would like, then click Download.

• Use metric units - metric units will be used where applicable when this slider is enabled.
   
• Include peak demands - enabling this option will include a demand register as well as a peak demand time for each power register included in the export.  Options visible when this slider is enabled include:
  • Calculate peak using: You may need to contact your utility company to determine how they calculate demand charges.
    • set demand: If a utility uses a "set demand" approach, the highest demand recorded during the billing cycle determines the demand charge for that entire period
    • rolling demand: With a "rolling demand" approach, the utility might calculate demand charges based on a rolling average or total consumption over a longer period, potentially resetting at the start of each billing cycle. 
    • Demand polarity:
      • positive
      • negative
      • positive or negative, whichever is (greater)
    • Demand interval length (Can be set to 15, 30, or 60 minutes)
       
• Export all registers (enabled) - Include all configured registers in the export
• Export all registers (disabled)
  • Filter: Use the filter to select which registers to include in your data export. This option appears only when 'Export all registers' is disabled. Click 'Add a filter' to choose registers for export. To remove selected registers, use ‘Remove selected registers.’
    
    To add a new filter, tap 'Add a filter' and use the 'Append new filter' dialog to add or remove registers based on the available options:
    
    
    • Register Name -Filter available registers by register names that exist in the Installation Settings of the meter. This option is useful when you have a list of specific registers that you would like to include, and you would like to specify them by name.
    • Register Type - Filter available registers by type. Using this option, you can choose to add all registers of a specific type, e.g. all registers recording 'Current' readings. 
    • Regular expression matching register names -advanced feature. This field can accept a regular expression (regex) that may exist within the Installation Settings register names.