Overview
Data can be exported directly from eGauge 4xxx meters using a USB mass storage device. These exports automatically contain day-granular data. All data from epoch (the date set in “Date and Time Recording Started”) until the date and time the export was initiated is copied.
To select a specific granularity or time range (or otherwise automate USB exports), an auto.run file must be created and loaded on the USB mass storage device, click here to learn more.
Prerequisites
- USB drive (4GB+) formatted as EXT3 or VFAT
Instructions
Step 1: Insert your USB drive into the eGauge. The Storage Menu will appear on the LCD screen. Menu navigation is performed using the multiswitch button. Moving the switch left or right will change the selected option. Pushing the multiswitch in will confirm the selection. "Export data" should be highlighted by default. To begin the export, push the multiswitch in:

Step 2: Once the export has begun, the screen will read export started. The export process takes a variable amount of time depending on the amount of data present on the eGauge.

Step 3: Once the export has finished, the screen will read "export finished". The OK option will be highlighted. Push the multiswitch in to acknowledge.

Step 4: After acknowledging the export, the Storage Menu will appear again. Move the switch left or right until Exit & Eject is highlighted. Push the multiswitch in to select this option. Once the main LCD menu appears, the USB mass storage device can be safely removed.
