Cellular Modem (Multitech MTE-LAT6-B07) (Discontinued)

Discontinued Product

Model: MTE-LAT6-B07

 

Warning

 

 

Overview

The Multitech cellular modem is a cellular to Ethernet modem that can provide the eGauge unit with internet access on a 4G LTE T-Mobile or AT&T network.

Specifications

  • Cellular: T-Mobile LTE Cat. 4
  • Operating Temperature range: -10°C to +50°C
  • Relative humidity: 10% to 85% operating / 5% to 90% storage
  • Full Spec Sheet (Data-sheet PDF)
 
 

Included Hardware

  • Multitech cellular modem kit
    • 1x Multitech cellular modem
    • 2x Antenna
    • 1x 120V Power Adapter
    • 1x Ethernet cable
    • 4x Rubber feet stickers
    • 1x DIN rail mounting stick
  • Cellular router accessory Kit
    • 2x Rubber O-Ring
    • 2x Extension Cable (short, SMA)
    • 1x DIN rail mounting clips (black)
 
 

Installation & Assembly

Information

  • Ensure both antennas are connected to the modem
     
  • Do not install the antennas inside a metal enclosure, underground, or anywhere the signal may be blocked or degraded
     
  • If a dataplan is purchased at the same time as the Multitech cellular modem, the modem will come with the SIM card installed and pre-activated on the T-Mobile network.
 

 

Example setup for installing inside an enclosure

  1. If using a non-eGauge data plan, insert the SIM card to the cellular modem according to the Multitech quick start guide that comes with the modem.
     
  2. If applicable, attach the DIN rail mounting stick and DIN rail clips to the Multitech cellular modem and mount in the enclosure.
     
  3. Connect the 2 SMA antenna extension cables to the Multitech antenna ports, and into pre-drilled holes on the enclosure. Use the 2 rubber O-rings to make a watertight seal.
     
  4. Attach the 2 antennas to the extension cables.
     
  5. Connect the Ethernet cable from the eGauge to the Multitech cell modem.
     
  6. Plug the power supply into a 120V outlet and the barrel jack to the Multitech modem.

Software configuration Information

When purchased with a dataplan, eGauge Systems pre-configures and tests the modems with the T-Mobile data plan purchased.