Twisted Pair Wire

twisted pair wiring appropriate for extending CT leads.

Visit the online store page

Model:  TP Wire Spool: 100'/250'/500'

  • If extending CT leads, make splices using the CT extension pack or by soldering. Wire nuts do not provide a stable enough connection and should not be used.
 

Overview

18ga black and white twisted pair wire for extending CT leads or other signal wiring. Twisted pair wire is 18 AWG rated at 600V. Wire is sold without connectors or other hardware. Available in 100', 250' and 500' spools.

Specifications

  • 18 AWG
  • 600V rated
  • UL Style 1015
  • 105C rated
 
 

Included Hardware

  • Twisted pair wire (available in 100, 250, and 500 foot spools)
 
 

Installation & Assembly

For extending CT leads:

  • Ensure black/white wires are connected consistently. When CT leads are extended be sure to verify correct CT readings against a handheld meter to identify any bad splices.
  • A maximum extension length of 100' is recommended.
 

Step 1: Remove the existing 2 pin CT plug from the CT lead.
Step 2: Splice in the required length of twisted pair wire. Soldering the splices is recommended. The CT extension pack or butt splice connectors are a secondary options. Wire nuts are not recommended.
Step 3: Reattach the 2 pin CT plug. Ensure the polarity on the plug is correct and connect to an eGauge sensor port as usual.