DIN Rail Mounting Kit

Visit the online store page

Model: EGMK

 

WARNING

Make sure to only use the included machine screws for mounting the DIN clip or bracket to the eGauge. Other screws could be too long and damage the meter

 

 

Overview

The DIN Rail Mounting Kit is used to attach the eGauge Core or Pro to a piece of DIN rail or another surface. The kit comes with one DIN clip that is screwed directly into the meter, one L-bracket for using the DIN clip at a 90-degree angle to the mounting surface, and all necessary screws to connect each piece.

 

Included Hardware

  • 3x 6-32 x 3/16” Pan Head Machine Screws
  • 4x Silver Screws (for connecting eGauge meter to DIN clip or L-bracket)
  • EG4xxx DIN clip
  • EG4xxx L-bracket
 
 

Install & Assembly

 

 
 

Information

  • Depending on the orientation the eGauge is installed, the LCD menu can be rotated using the LCD menu button to navigate to Settings → Display → Orientation. Orientation can be set to “normal”, “counter clock-wise”, “upside-down”, or “clockwise”. See LCD manual for LCD information