Visit the online store page
Model: ESH044

CTid
CTid hardware is compatible with EG4xxx or newer.
The eGauge Sensor Hub is capable of connecting up to four sensors to the EG4xxx meter inputs. It allows for any mix of powered and non-powered sensors. Switches on the hub determine the connection of either the powered or non-powered port to the meter. An RJ-45 breakout cable connects the Sensor Hub to as many as four adjacent inputs on the meter. An RJ45 coupler is available to increase the RJ45 cable length if necessary. To connect additional sensors beyond four, multiple Sensor Hubs may be utilized with a single meter.
The Sensor Hub offers a convenient solution for extending the cable length of AC CTs without the need for splicing or altering the CT leads.
Specifications
- ABS
- 75 x 50 x 21 (mm)
- 3 x 1.8 x 0.8 (in.)
- 2 breakaway mounting tabs for 5mm fasteners
- 2 DIN rail 3mm coarse thread screw holes, 4mm depth on back (compatible with EG4xxx meter mounting kit)
- -30 °C to 70 °C
- Humidity range: Up to 80%
- 47 CFR Part 15, Subpart B – Unintentional Radiators, Class B for Home or
Commercial use - 2-year limited warranty
Included Hardware
- (1) Sensor Hub
- (1) RJ-45 coupler
- (1) 19" RJ-45 to 2-pin breakout cable
- (1) 3" Mini-USB power cable
Installation & Assembly