The DIN Rail Mounting Kit is used to attach the eGauge Core or Pro to a piece of DIN rail or another surface. The kit comes with one DIN clip that is screwed directly into the meter, one L-bracket for using the DIN clip at a 90-degree angle to the mounting surface, and all necessary screws to connect each piece.
Before beginning check that you have all of the included parts. Depending on the mounting style chosen, all parts may not be used:
| Qty | Item |
| 1 | DIN Clip |
| 1 | Right Angle Mounting Bracket |
| 4 | DIN clip screws |
| 3 | Mounting Bracket screws |
Information
- Depending on the orientation the eGauge is installed, the LCD menu can be rotated using the LCD menu button to navigate to Settings → Display → Orientation. Orientation can be set to “normal”, “counter clock-wise”, “upside-down”, or “clockwise”. See LCD manual for LCD information
Use with the Sensor Hub (ESH044)
If DIN rail mounting is desired, the ESH044 is compatible with the DIN clip included with the eGauge DIN Rail Mounting Kit.
Line up the holes on the DIN clip with the mounting holes on the back of the Sensor Hub in the desired orientation and attach it to the sensor hub with (2) of the (4) ¼" DIN clip mounting screws included with the mounting kit:
