Visit the online store page
Model: Power Whip
![]() |
![]() |
Overview
The Power Whip is an installation component used to connect the eGauge meter to a breaker panel.
Specifications
- 5-pin power plug (heat shrinking around wire terminations)
- 4x 8' segments of THHN #12 wire (NEC color coded for US voltage)
- THHN #12 stranded copper wire
208V Color |
Connection |
277V Color |
Connection |
|
White |
Neutral |
White |
Neutral |
|
Black |
L1 |
Yellow |
L1 |
|
Red |
L2 |
Orange |
L2 |
|
Blue |
L3 |
Brown |
L3 |
Single-Phase Color |
Connection |
White |
Neutral |
Black |
L1 |
Red |
L2 |
Blue |
[REMOVED] |
Installation & Assembly
- The 5-pin power plug is connected to the 4 segments of wire with heat shrinking at the base. Trim the wire segments to length and connect the appropriate colors to the correct breaker and neutral connections. Insert the 5-pin power plug to eGauge when complete.
- If the 208V whip is used on a single-phase 208V or 240V system, the blue wire (L3) should be removed from the whip assembly.