Visit the online store page
Model: Tyco model 284506-2
Information
- CTs purchased from eGauge already have the 2-pin connectors affixed.
- eGauge Pro and Core meteres already have the 2-pin plug connected to the DC voltage port.
Overview
Sensor port connector with 2 positions. Accepts one positive and one negative wire. Used to connect CTs and supported sensors to the eGauge, as well as DC voltage to the EG4xxx DC input. Replacement component for eGauge meters.
Specifications
- 14-30 AWG
- Weight: 1 gram
Included Hardware
- 2-pin Plug
Installation & Assembly
- The two-pin plug is secured to the ends of a sensor lead for connection to the eGauge. May also be wired to DC output to power and/or take DC voltage measurements to the EG4xxx DC voltage input.
- Suggested screw torque for the 2-pin plug is 2.7 in.-lb.