Overview

Modems provided by eGauge are pre-configured to work on the T-Mobile network using data plans provided by eGauge Systems. These steps are only needed if the modem was factory reset or configuration was modified.

The APN for T-Mobile plans provided by eGauge is iot.tmowholesale

Prerequisites

To complete the steps in this guide you will need: 

• A computer with an Ethernet connection to access the modem interface
• An activated SIM card purchased from eGauge Systems.

Instructions

Step 1: Download the IR302 eGauge configuration for T-Mobile here.

Step 2: Connect a computer to a LAN port of the cell modem.

Step 3: Open a web browser to http://192.168.2.1/ and log in with username adm and password 123456.

Step 4: The modem may prompt to opt-in to a User Experience Program from InHand. You may click "CANCEL" on this. It may be toggled on or off later in Services -> User Experience Plan.

Step 5: Navigate to System -> Config Management.

Step 6: Under "Router Configuration", click the "Browse" button and choose the file downloaded earlier.

Step 7: Press "Import", choose "OK" when it asks if you are sure, and finally press "Reboot" when it prompts to be rebooted.