Overview
The EG4xxx model eGauges have a built-in LCD display. One of the features is that it will "scroll though" and display instantaneous and cumulative values for existing registers. By default, instantaneous and cumulative values for all configured and newly added registers will be displayed in the rotating LCD list.
Prerequisites
- EG4xxx or greater
Instructions
Step 1: Click the menu(≡) in the upper left, then select Setup → Other Settings
Step 2: Select ‘LCD’ from the left menu, at the bottom.
Step 3: Next, select which registers you would like to display and if you would like to display the Instantaneous Value and/or Cumulative Value.
Meters running firmware v.4.7.1 or later will also have options for Max. Demand and Min Demand. For more detail on setting up demand calculations please see: How To: Display Demand info on the LCD
When done, click ‘Save’.
Information
- Note that some register types may not make much sense when displayed as cumulative values (voltage) or instantaneous values (pulse counts). This tool allows the user to set which registers are displayed, and whether those registers show cumulative, instantaneous, or both values. This tool does not have any impact on the data displayed on the main graph page, and does not effect the data recorded by the eGauge.
Additional Resources