How To: Manually set eGauge Date & Time

If the date and time on your meter is not accurate, follow these steps to set it correctly.

Overview

The Date and Time setting on an eGauge meter should be set during initial configuration and will stay current as long as the meter has a connection to an NTP server. Occasionally, date and time settings can be lost due to power outages lasting longer than approximately 8 hours, or if an NTP server is not accessible.  Follow the steps below to manually set the date and time on your eGauge meter.

Prerequisites

  • Access to the eGauge interface
  • Valid login credentials to the eGauge meter

 

Instructions

Step 1: Use the Main Menu to navigate to: Setup → Other settings

 

Then, Click Date and time at the left:

 

Step 2: Manually edit the date and time to be correct.

 

Step 3: Click the Save button at the bottom of the page and reboot the eGauge meter when prompted.

 

When the meter restarts the database will roll forward as the timestamps catch up with the change leaving a gap in the readings equal to the amount of time the date was off by. Data that was already recorded will retain the timestamp it was recorded with, new data will be recorded with the corrected time stamp.

 

Â