Overview
The eGauge can be configured to send alerts based on a variety of trigger conditions. Follow the steps in this article to get started with adding user defined alerts in the classic interface. Full technical documentation regarding Classic alert setup can be found here.
- Firmware version 4.6 and newer can have alerts configured through the Modern Interface.
Prerequisites
The eGauge must be powered on and connected to the Internet in order to send alerts. Depending on LAN security at the installation site and the alert method chosen, coordination with the IT staff may be needed for the eGauge to be allowed to send messages.
Instructions
Step 1: Access the User Defined Alert from the classic home screen settings by clicking Settings → Alerts (at the left).
Step 2: Choose the Alert provider from the list and fill out the appropriate fields. For full details on options please see: Alert Viewer
SMTP Gateway: The eGauge utilizes a specified SMTP server to send email and SMS alert messages. Up to four email or SMS destinations can be configured. Click the Send Test Message button to verify delivery.
eGuard Alert Service: This option utilizes the eGuard alert service to send messages. This option requires the user to be logged into an eGuard account. Alerts will be sent to the email address associated with the eGuard account in use when the service is activated.
custom: (Advanced option) Sends JSON formatted data as a POST to a user specified URI. For an example of JSON output please see: JSON Alert POST data
Step 3: Configure user defined alerts in the provided fields by filling in the provided fields to add the conditions you'd like to alert on. The examples shown below make comparisons to the Grid register.
