Step-down transformer

 Visit the online store page

Current manufacturer information: Functional Devices model TR50VA008

Stepdown transformers are intended only to power 120V equipment off higher voltage service. To measure 480V delta systems (no neutral), 600V delta systems (no neutral), or 347/600V Wye, please use the EV1000 High Voltage Sensors.

step-down-fdt-tr50va.jpg
Step-down transformer (480/277/240/208 to 120V)

208/240/277/480V to 120Vac, dual hub, 50VA UL Listed transformer. Used for monitoring 480V delta services and powering 120V accessories from higher voltage systems.

Transformers provided by eGauge are 50VA (50 watts limit at 1.0 power factor, lower wattage when power factor < 1). They are intended to be used for powering a small amount of equipment provided by eGauge. Attempting to supply loads ~50VA or higher will cause the transformer to trip and require a manual reset.

Specifications

Full specs (data-sheet PDF)

Hardware included

Assembly/installation information

Follow instructions included with transformer, ensure correct primary and secondary wires are used.

Documents

Spec Sheet

Related Information


Revision #5
Created 17 February 2020 19:19:42 by Andrew
Updated 12 November 2021 00:20:10 by aaron