Power Whip (208V or 277V)

 Visit the online store page
SKU: Power Whip

The Power Whip is an installation component used to connect the eGauge meter to a breaker panel.

Each Power Whip includes a 5-pin Power Plug and four 8’ lengths of THHN #12 stranded copper wire for Neutral, L1, L2 and L3.

Available in 208V (white, black, red blue) and 277V (white, yellow, orange, brown).

 

eGauge Power Whip

Specifications

Assembly/installation information

The 5-pin power plug is connected to the 4 segments of wire with heat shrinking at the base. Trim the wire segments to length and connect the appropriate colors to the correct breaker and neutral connections. Insert the 5-pin power plug to eGauge when complete.

If the 208V whip is used on a single-phase 208V or 240V system, the blue wire (L3) should be removed from the whip assembly.

eGauge 5-pin power plug


Please visit kb.egauge.net for the most up-to-date documentation.