EG4xxx DC Power Supply

 Visit the online store page

SKU: TPC-DC
DC power supply for EG4xxx (Core/Pro) Meters (with international adapters).

The EG4xxx DC Power Supply may be used for:

When measuring AC power, the AC voltage inputs must be utilized, power cannot be calculated otherwise. The EG4xxx DC Power Supply may be used to power an eGauge while it is measuring high voltage, but the AC inputs (L1/L2/L3/N) must be connected to the system being monitored.

 

eGauge Test Power cable

Specifications

Hardware

Warnings

The EG4xxx DC Power Supply may only be used with EG4xxx meters (Core and Pro).

The EG4xxx DC Power Supply is suitable for testing and programming an eGauge, and cannot be used when measuring power.

The EG4xxx DC Power Supply is rated for 120-240Vac. It cannot be connected to higher input voltages.

Assembly/installation information

The EG4xxx DC Power Supply must be connected to the Ldc terminal. If connected to a Sensor/CT input damage may occur

  1. Select the appropriate receptacle adapter.
  2. Clip the receptacle adapter into the body of the power supply.
  3. Connect the two pin plug to the Ldc terminal (next to the five pin power plug).

Please visit kb.egauge.net for the most up-to-date documentation.