5 Pin Power Plug

 Visit the online store page

Current manufacturer information: Adam Tech EBH-05-G

Voltage terminal connector block with 5 positions. Accepts three line voltage conductors (L1, L2, and L3) and a neutral conductor. Split-phase installations use the L1, L2, and N terminals. Single phase installations use the L1 and N terminals.

This is a replacement part for eGauge meters. Every eGauge meter includes a 5-pin plug with it.

eGauge 5-pin Power Plug

Hardware included

Assembly/installation information

Connect appropriate voltage measurements to the screw terminals and tighten securely. Do not connect anything to the "Unused" terminal. If wiring a single-phase system, leave the L3 terminal unused. 

Suggested torque for the 5-pin power plug is 5 in.-lb.

Revision #4
Created 17 February 2020 20:03:25 by Andrew
Updated 27 April 2021 20:30:28 by aaron