2-pin CT Plug
Visit the online store page
Original manufacturer part number: Tyco model 284506-2
Do not connect unsupported sensors to eGauge meter inputs or damage may occur.
- CTs purchased from eGauge already have 2-pin connectors affixed
- The eGauge Core and Pro meters already have a 2-pin plug connected to the DC voltage port
|
|
| 2-pin Plug |
Sensor port connector with 2 positions. Accepts one positive and one negative wire. Used to connect CTs and supported sensors to the eGauge, as well as DC voltage to the EG4xxx DC input. Replacement component for eGauge meters.
Hardware included
- 2-pin Plug
Specs
- 14-30 AWG
- Weight: 1 gram
Assembly/installation information
The two-pin plug is secured to the ends of a sensor lead for connection to the eGauge. May also be wired to DC output to power and/or take DC voltage measurements to the EG4xxx DC voltage input.
Suggested screw torque for the 2-pin plug is 2.7 in.-lb.