Environmental, Analog and Other Sensors
- Pulse Sensor (EPS)
- Low Voltage / Dry Contact Sensor (ELV2)
- Temperature Probe Sensor (ETN100)
- Ambient Temp Sensor (ETLW)
- IMT Weather Station (Si-RS485TC-2T-v-MB)
- Sensor Hub (ESH044)
- eGauge High Voltage Sensor (EV1000)
- 4-20mA Sensor (EC420)
Pulse Sensor (EPS)
Visit the online store page
Requires the eGauge Sensor Hub and eGauge model EG4xxx (Pro or Core), not compatible with older model units.
Only use straight-through RJ-11 cables to connect powered sensors to the Sensor Hub. Telephone systems generally use "reverse" style RJ-11 cables which are incompatible with the Sensor Hub. See this article for more information on verifying the correct RJ-11 wiring. Every Sensor Hub compatible sensor sold by eGauge Systems comes with a straight-through RJ-11 cable.
The eGauge Pulse Sensor is used in conjunction with the Sensor Hub and an EG4xxx model meter (Core or Pro) to record pulse output data from devices such as water and gas meters. The Pulse Sensor can accept standard 2-wire pulse outputs or 3-wire 5-volt Hall effect pulse outputs.