Enclosures and Mounting Hardware

Complete kits which simplify installation on a variety of electrical services.

Powered Enclosure Kit (120/240VAC, 120/208VAC)

 Visit the online store page
SKU: PEK-120/PEK-120-XL

The Powered Enclosure Kit is designed for installation of the eGauge in combination with one of several communication protocol devices.

Components included Enclosure

The kit comes with components that complement the eGauge main unit, decreasing installation time and reducing complexity. Compatible services: 3-phase 4-wire 120/208Vac, split-phase 120/240Vac.

Hardware included

Contains (un-assembled):

Assembly/installation information

Documents

Related Information

Hinged Enclosure (IP66 rated)

 Visit the online store page

Current manufacturer information: Integra H------HLL (dashes replaced with dimensions, see spec sheets below)

IP66 rated polycarbonate enclosure, hinged and lockable lid. Can be used to house eGauge meter(s) and accessories. Available in 16"x14"x7", 14"x12"x6", and 12"x10"x6" sizes.

Each enclosure comes with an eGauge Mounting Kit, and 2 DIN rail(s) (DIN rail(s) pre-installed). 

hinged-enclosure.jpg
Hinged Enclsosure

Specifications

Full specifications can be found in the Documents section.

Hardware included

Assembly/installation information

  1. Attach the DIN clip to the underside of eGauge using 4x silver screws
  2. Optionally attach the L-Bracket to the DIN clip for alternative mounting options
  3. Connect the eGauge and other equipment to the pre-installed DIN rail

Documents

Powered Enclosure Kit (277/480VAC)

 Visit the online store page
SKU: PEK-277/PEK-277-XL

The Powered Enclosure Kit is designed for installation of the eGauge Meter on a 277/480V service where 120V is needed for third party hardware.

The kit comes with components that complement the eGauge main unit, decreasing installation time and reducing complexity. Compatible with 277/480V. Includes 277V:120V step-down transformer for powering 120V accessories.

powered_enclosure_kit_277-pek277.jpg
277/480VAC Powered Enclosure Kit

Hardware included

Contains (unassembled):

Assembly/installation information

277V Powered Enclosure Kit installation guide

Documents

Regular: 14"x12"x6" Enclosure spec sheet

Extra large: 16"x14"x7" Enclosure spec sheet


DIN Rail Mounting Kit

 Visit the online store page
SKU: EGMK

The DIN Rail Mounting Kit is used to attach the eGauge Core or Pro to a piece of DIN rail or another surface. The kit comes with one DIN clip that is screwed directly into the meter, one L-bracket for using the DIN clip at a 90-degree angle to the mounting surface, and all necessary screws to connect each piece.

Make sure to only use the included machine screws for mounting the DIN clip or bracket to the eGauge. Other screws could be too long and damage the meter.

eg4xxx-mountingkit-mounted-side.jpg
eGauge Mouting Kit

Hardware included

Assembly/installation information

DIN Rail Mounting Kit video

Software configuration Information

Depending on the orientation the eGauge is installed, the LCD menu can be rotated using the LCD menu button to navigate to Settings -> Display -> Orientation. Orientation can be set to “normal”, “counter clock-wise”, “upside-down”, or “clockwise”. See LCD manual for LCD information